Well, it’s about time we had a DIY on here! Things have been pretty busy this summer with my day job as a freelance graphic designer so DIYs and fun blog stuff have sadly taken a back seat. But hey, I’m back….and this tutorial posts is actually a special one!
I was approached by the charity organisation Little Hearts Matter back in June about doing a collaborative tutorial for a fundraiser project they’re running this October called ‘HANDMADE HEARTS‘ to help raise money for the charity. If you aren’t aware of the organisation, their core focus – in a nutshell – is offering valuable support and information to families whose children are affected with the single ventricle condition…also known as ‘half a working heart’. From initial diagnosis to treatment to facing real life challenges, Little Hearts Matter are there to help these children and young adults face their difficulties every step of the way!
I was more than honoured to be asked let alone get involved, so to help out, I’ve created this super simple, hassle-free DIY tutorial if you fancy making little heart-shaped planters for miniature succulents and cacti for a good cause! I mean, who doesn’t like a bit of cacti love, right? Especially when they’re sooooo teeny and cute :) Anyway, all the information on signing up to this fundraiser can be found here. So have fun with these and I hope it helps raise some money!
WHAT YOU NEED:
- Plaster of Paris
- plastic cup or jug to mix your ingredients in
- tea light candles
- measuring utensil
- plastic utensil to stir
- deep heart-shaped silicon moulds (you can get either this 6-pack one or a large tray)
- array of miniature cacti + succulent plants (I bought mine from the Conservatory Archives in London)
[STEP 01] In a mixing jug, pour out one cup of water and then add two cups of plaster into it (always adding the plaster to the water). Mix them both up until you have a somewhat not-too-runny smooth consistency, like a pancake mixture! If it’s too runny and a little bit more plaster and mix well. You want to make sure there aren’t any lumpy bits in there!
[STEP 02] As soon as the mixture is done, pour it gently into each of the 6 heart-shaped moulds so it’s roughly 5mm from the top. (you don’t want it right to the edge otherwise when you place the tea lights into it, the mixture will overflow!) Take your tea lights and place them into each mould – make sure they are in the centre and not touching the edges i.e. have some of the plaster of paris mixture surrounding it. Press the tea lights down gently so that submerses enough that the top edge is somewhat flush to the top of the mixture. This mould is deep enough allow room for the tea lights without it affecting the shape. If it tries to pop up then place a pound coin or a pebble to weigh it down while it dries. Leave it somewhere safe to dry for an hour.
Now, should you wish to opt for a large heart-shaped silicon pan as oppose to the 6-tray one, what you can do is either dot a few tea lights about or place a plastic cup or the bottom end of a plastic bottle into the mixture. Again, push it down so it’s 2/3rds in and use weights to hold the plastic cup/bottle base down while it dries.
[STEP 03] After one hour, take your moulds and gently pop out your heart-shaped cast out, which should be pretty simple with the help of silicon moulds! Slowly loosen the tea lights (or cup/bottle bases if you’re doing a bigger planter) until it gives and comes out. If the metal bit of the tea lights come out with the candle, try to pop that back into the cast. The reason for this is it protects your planter form any moisture from the soil or from when you water your cacti doesn’t affect the cast. For your bigger heart-shaped planters, if you’re using plastic cups or bottle bases you can either keep them in there and just trip down any protruding bits or take it out and place plastic plant pots in there…depending on the size, of course.
Now, leave these to completely dry for another 4-6hours. This is particularly recommended if you plan on painting it.
[STEP 04] Now take your miniature cacti and succulent plants and repot them into your freshly made heart-shaped planters. For your larger planters, you either use larger succulents or have an array of various ones like you would do in a terrarium.
And there you have it! Little heart-shaped planters (pretty apt, right!) for your mini cacti! I reckon they have so much appeal you could easily sell them for a fiver or more! And the larger ones for at least £10-12.
Well, I do hope that was all very straightforward to follow. Any questions, just leave a comment below and i’ll get back to you.
If you’re planning to take part in the fundraiser next month please remember to sign up here to get your free fundraiser pack with all the deets. There will be more heart-themed tutorials and recipes shared on all the Little Hearts Matter social media platforms so keep your eyes peeled for those this month so you can get your make, bake and sew on!! This is a great cause so please can I ask you to spread the word around at work, school and home….wherever you are! Oh and if you do make any of these please share your photos of them using the hashtag #handmadehearts so we can all follow and see what you’re up to!
Also, if you’re after more heart-themed DIY inspiration check out this necklace and personalised felt love hearts I did back a couple of years ago which I think would sell too.
Happy crafting folks!! xx
[Image credit: ©MadebyMolu]
**This post was in collaboration with the Little Hearts Matter charity, however, all words and opinions are my own, dictated completely by my love for DIY and styling. If you wish to share any images from this tutorial, please provide full credit to Made by Molu including complete links to this post.**